XLX349
   XLX349 v2.6.2 - Dashboard v2.4.7 XLX349 by NK2I  /  Service uptime: 0 days 08:07:57

XLX349: Multi-Mode / Multi-Protocol Reflector

Welcome! XLX349 is an open digital voice reflector hosted by NK2I in New York City. One reflector speaks several protocols, so you can use the radio you have and still talk to everyone else. An AMBE hardware transcoder sits behind it, so D-STAR, DMR and Fusion users on the same module hear each other.

Modules

ModuleNameWhat it's for
AParrotEcho test. Key up, then hear yourself played back.
BHKCThe cross-network room, bridged to all four DMR networks at once
CBrandmeisterBridged to Brandmeister TG 3166218
DFreeDMRBridged to FreeDMR TG 349349
ESystemXBridged to SystemX TG 349349
FTGIFBridged to TGIF TG 349
GYSFSystem Fusion home module. YSF 31349 users land here.
HNXDNNXDN TG 31349 users land here
IP25P25 TG 31349 users land here

DMR

Through DMRGateway (WPSD / Pi-Star): your hotspot stays on its own network

  1. Link to the reflector: make a private call to 68349, or choose XLX349 in your hotspot's XLX settings.
  2. Pick a module: make a private call to 640nn, where nn is the module's letter position in the alphabet. For example, 64001 = A, 64002 = B, 64007 = G.
  3. Switch to TG 6 on your radio and talk.
  4. To unlink from the module, make a private call to 64000.

Hotspot pointed straight at XLX349 as its DMR master

  1. Pick a module: make a private call to 40nn, for example 4001 = A, 4002 = B.
  2. Talk on TG 9.
  3. To unlink, make a private call to 4000.
Try it: link to Module A (64001 or 4001), key up for a few seconds, then release and listen.

Bridged DMR networks

Several modules are permanently bridged to talk groups on the major DMR networks. If you're already on one of those networks, you don't need to set anything up. Select the talk group and key up, and you're on XLX349.

NetworkTalk GroupXLX349 Module
BrandmeisterTG 3166218C (and B)
FreeDMRTG 349349D (and B)
SystemXTG 349349E (and B)
TGIFTG 349F (and B)

D-STAR

XLX349 speaks DPlus, DExtra and DCS. Use whichever your gateway prefers. Put the module letter where m is:

ProtocolURCALL to linkDTMF
DPlusREF349mL*349m
DExtraXRF349mLB349m
DCSDCS349mLD349m

For example, DCS349AL links you to the parrot. Set URCALL to U (seven spaces, then U) to unlink. WPSD / Pi-Star users can also choose the reflector and module from the D-STAR link manager.

YSF / System Fusion

In WPSD / Pi-Star YSF mode, choose YSF 31349 from the reflector list. You'll land on Module G. To switch modules, set your radio's TX DG-ID:

TX DG-ID101112131415161718
ModuleABCDEFGHI
Two gotchas: set your radio to DN mode, because VW (Voice Wide) frames are dropped. And if your hotspot runs the DG-ID Gateway, it takes the DG-ID before the reflector sees it, so turn it off to switch modules.

M17

Link your M17 hotspot or client to M17-349 and the module you want, for example M17-349 A for the parrot.

NXDN

Link your hotspot or repeater to NXDN Talk Group 31349. You'll land on Module H, together with anyone from another mode who links to H.

P25

Link your hotspot or repeater to P25 Talk Group 31349. You'll land on Module I, together with anyone from another mode who links to I.

Connection cheat sheet

ModuleNameDMR
(DMRGateway, TG 6)
DMR
(direct, TG 9)
D-STAR
(DCS)
YSF 31349
TX DG-ID
M17NXDN / P25Bridged
AParrotPC 64001PC 4001DCS349AL10M17-349 A––
BHKCPC 64002PC 4002DCS349BL11M17-349 B–All four networks
CBrandmeisterPC 64003PC 4003DCS349CL12M17-349 C–BM 3166218
DFreeDMRPC 64004PC 4004DCS349DL13M17-349 D–FreeDMR 349349
ESystemXPC 64005PC 4005DCS349EL14M17-349 E–SystemX 349349
FTGIFPC 64006PC 4006DCS349FL15M17-349 F–TGIF 349
GYSFPC 64007PC 4007DCS349GL16 (default)M17-349 G––
HNXDNPC 64008PC 4008DCS349HL17M17-349 HNXDN TG 31349–
IP25PC 64009PC 4009DCS349IL18M17-349 IP25 TG 31349–
–UnlinkPC 64000PC 4000U––––

PC = Private Call · TG = Talk Group (group call) · Through DMRGateway, link to the reflector first with PC 68349 · The Modules list has every module's DPlus / DExtra / DCS codes.

Dashboards

Under the hood

XLX349 runs xlxd with the AMBEd transcoder on DVSI hardware. NXDN and P25 reflectors are peered into it, and an HBlink3 server carries the DMR bridges. Everything runs in Docker on a self-hosted Swarm cluster, using open-source images: ambed-xlxd-docker and hblink3-docker.

Questions or trouble connecting? Find NK2I on the reflector. 73! · Layout inspired by W0CHP's XLX493 page.

cesar+nk2i@poa.nyc